#1634
 | Diesel sound decoder with 17 accessory sound functions Dimensions: 75.0mm x 17.5mm x 7.5mm |
| Replaces most locomotive
circuit boards |
| 17 accessory functions allowing more sound control then ever before |
| Programmable for either 2-digit (1-127) or 4-digit (1-9999) addresses |
| 1.5 amp capacity |
| Synchronized diesel prime mover with randomly associated locomotive sounds |
| Programmable individual sound volumes |
| Programmable start voltage, acceleration and deceleration rate, and top voltage |
| Selectable factory default speed curve |
| Programmable 14, 28, 128 speed steps |
| Supports advanced consisting (CV19) and programming on the main (OPS mode) |
| Compatible with NMRA DCC standards |
| 28mm speaker included |
#1634
HO Gauge Synchronized Steam Sound Decoder with 12 Sound Functions Dimensions: 47.0mm x 17.5mm x 5.2mm
| Synchronized steam chuff with random sounds |
| 1.5 amp capacity |
| Programmable for either 2-digit (1-127) or 4-digit (1-9999) addresses |
| Programmable start voltage, acceleration and deceleration rate, top voltage and 14, 28, 128 speed steps |
| Directional lighting control for front and rear lights at 0.2 amp rate |
| 12 accessory sound functions (F1-F12) |
| Supports advanced consisting (CV19) and programming on the main |
| Compatible with NMRA DCC standard |
| Complies with part 15 of FCC |
| 28mm speaker included |
#1638
Sheer Brilliance Mini HO EMD Modern Large Diesel Sound Decoder with 19
Accessory Sound Functions
Dimensions: 33.0mm x 10.5mm x 5.0mm
| Synchronized diesel prime mover with randomly associated locomotive sounds |
| User selectable 11 different horns and 7 bells |
| Programmable individual sound volumes |
| 1.5 amp capacity |
| Programmable start voltage, acceleration and deceleration rate, top voltage, and 14,28,128 speed steps |
| Selectable factory default speed curve |
| Directional lighting (FO) at 0.2 speed curve |
| Programmable "Rule 17" directional lighting |
| Programmable for either ditch lights, mars light, or strobe light |
| Supports advanced consisting (CV19) and programming on the main (OPS mode) |
| Compatible with NMRA DCC standards |
| NMRA 8 pin plug included for easy installation |
| 20mm speaker included |
#1666
SOUNDER-SOUND ONLY DECODER FOR HO ALCO/SD60/F
The exclusive "Sounder" is a sound-only decoder and speaker
that's easily added to any HO locomotive equipped with a standard,
non-sound decoder or even any piece of rolling stock being pulled by the
locomotive equipped with wheel pickups.
The railroader simply "hooks-up" two wires to the track power
pickup points in the loco and suddenly can enjoy MRC's rich, Brilliance
sound and the world's most extensive feature set.
The Diesel's "3" Sounder provides three new and genuine ALco,
"F Unit" and SD60 prime mover sounds like selectable (33) horns,
8- bells, brakes, air releases, pop valves, cooling fans, coupling sounds
and more. Using simple soldering techniques, the Sounder can provide a
full complement of locomotive lighting effects: Prime Stratolight, Mars,
Ditch, Strobe (single and double) and on/off function for internal
lighting.
Features include:
| Use with any HO non-sound decoder from MRC or any other brand |
| Full 28 NMRA function capability |
| Select desired sounds and functions in "seconds" |
| No time consuming downloading or expensive purchases ... all the features are in the decoder |
| Use with any NMRA compatible DCC system to add sound "on the rails" or "below the rails" |
| Simple 2-wire hookup |
| Superb Brilliance sound quailty with multiple sounds and volume selectability |
| Capable of providing six dynamic lighting effects |
| 18V maximum input |
#1665
SOUNDER-SOUND ONLY DECODER FOR HO STEAM
The exclusive "Sounder" is a sound-only decoder and speaker
that's easily added to any HO locomotive equipped with a standard,
non-sound decoder or even any piece of rolling stock being pulled by the
locomotive equipped with wheel pickups.
The railroader simply "hooks-up" two wires to the track power
pickup points in the loco and suddenly can enjoy MRC's rich, Brilliance
sound and the world's most extensive feature set.
The new Steam Sounder with features similar to the Diesel unit,
magnificantly reproduces eight, genuine articulated and eight,
non-articulated steam locomotives prime mover sounds and you can select 33
whisles as well.
Features include:
| Use with any HO non-sound decoder from MRC or any other brand |
| Full 28 NMRA function capability |
| Select desired sounds and functions in "seconds" |
| No time consuming downloading or expensive purchases ... all the features are in the decoder |
| Use with any NMRA compatible DCC system to add sound "on the rails" or "below the rails" |
| Simple 2-wire hookup |
| Superb Brilliance sound quailty with multiple sounds and volume selectability |
| Capable of providing six dynamic lighting effects |
| 18V maximum input |
#1643
Sheer Brilliance Mini HO EMD Modern Switch
Diesel Sound Decoder with 19
Accessory Sound Functions
Synchronized
diesel prime mover with randomly associated
locomotive sounds
User
selectable 15 different horns and 7 bells
19
accessory functions allowing more sound control than
ever
Programmable
individual sound volumes
1.5 amp
capacity
Programmable
for either 2-digit (1-127) or 4-digit (1-9999)
addresses
Programmable
start voltage
Programmable
acceleration rate
Programmable
deceleration rate
Programmable
top voltage
Programmable
14, 28, 128 speed steps
Selectable
factory default speed curve
Directional
lighting (FO) at 0.2 amp rate
Programmable
Rule 17 directional lighting
Supports
advanced consisting (CV19)
Supports
programming on the main (OPS mode)
Compatible with
NMRA DCC standards
NMRA 8 pin plug
included for easy installation
Complies with
Part 15 of FCC
20mm speaker
included
Dimensions:
33.0mm x 10.5mm x 5.0mm
